Mech Tech Accessories and Pricing Guide

PARABLOCK

PBA // $23.95

This is a ‘ParaBlock’ and it is used with 1911 style frames which have been cut to accept ramped barrels. This device allows the Mech Tech CCU to be used with these frames.

FEED RAMP FOR GLOCK

GBL OR GBC // $16.95

This is a feed ramp and it is used with all Glock frames. This device is necessary for proper feeding with these frames. One feed ramp is included with each CCU for Glock pistols. Once the CCU has been properly assembled, the feed ramp cannot fall out. The feed ramp comes in three sizes: Large (GBL) for use with Standard and Large frames, Compact (GBC) for use with Compact frames and Gen 5 (GB GEN.5) frames. A small magnet retains this part in the frame during assembly/disassembly.

FEED RAMP FOR XD

XDR // $17.95

This is a feed ramp and it is used with all XD frames. This device is necessary for proper feeding with these frames. One feed ramp is included with each CCU for XD pistols. Once the CCU has been properly assembled, the feed ramp cannot fall out. A small magnet retains this part in the frame during assembly/disassembly.

TELESTOCK

TEL // $89.95

This is a 5 position telescoping stock shown fully extended and fully collapsed. It has a sling stud for mounting your own loop. Comes with a butt pad standard.

M4 FIXED STOCK

M4FS // $34.95

Yes, it looks like an M4 adjustable stock. However, we have replaced the buffer tube with our own adaptor to fix it in place.

M4 ADJUSTABLE STOCK

M4 // $99.95

This is a standard, 6 position, M4 stock (shown fully collapsed) with the buffer tube mounted to the CCU using the adapter shown in the photo immediately below. The M4 Adapter comes with this stock and so is incuded in the price shown.

M4 STOCK ADAPTER

M4A // $34.95

This adapter attaches to the rear of the CCU housing. Many customers already own an M4 stock and buffer tube. The adapter accepts both military and commercial buffer tubes.

BUTT PAD

BP // $13.95

This butt pad comes standard on our Telestock. It is also available for use on our M4 Fixed and M4 Adjustable stocks.

VERTICAL FORE GRIP – FOLDING

VGF // $25.95

The folding fore grip has locks in multiple positions (backward and forward) and mounts to our Quad Rail for most versatile use.

RED/GREEN DOT OPTIC

RGS // $57.10

This unique holographic sight gives you a choice of the classic red dot or a new green dot. If you have never used a green dot you don’t know what you’re missing. Each color can be intensity adjusted with the dial on top. The sight also features flip-up protective lens covers. Standard Picatinny mounting with a quick release.

MONORAIL

MRL // $52.95

This is a tactical accessory mounting rail. It is 15″ end to end. No modifications to the CCU are required. It replaces the Standard Rail.

QUAD RAIL

QRL // $169.95

This tactical accessory mounting rail has the Mono Rail and 3 6.5″ rails. This is the best mounting option for our Vertical Fore Grip. It replaces the Standard Rail and Molded Fore Grip.

MINI QUAD 

MQR // $89.95

Mini Quad – attaches to barrel providing 4 2-1/2" short accessory rails – very solid. This does NOT replace the standard rail, it aligns properly with it for an open front sight.

LONG RISER

PSR // $14.95

This riser is 5 3/4″ long with 13 Picatinny slots. Long Riser provides about 1/2″ of lift. You can mount this on the Standard Rail, QuadRail or MonoRail to gain elevated sight height.

THREE SLOT RISER

TSR // $14.95

The Three Slot Riser is good for mounting your Red/Green Dot Optic so that you can still use your Flip Up Front & Rear Sights and see them through the optic.

RAIL GUARDS

RG // $17.95 // PKG. OF 12

Used with the Quad Rail these handy rubber rail guards simply snap in place on the rails and provide both protection for the rails and a more comfortable grip.

M16 ‘CARRY HANDLE’ SIGHT SYSTEM

FRONT SIGHT // M16F // $22.95
REAR CARRY HANDLE REAR SIGHT // M16R // $73.95

M16 style sight system. The front and rear sight set mount directly to the Mini Rail Kit, Mini Quad Rail, MonoRail and QuadRail rail systems. The sights are adjustable and operate exactly as M16 sights. (shown mounted on a rail for clarity, rail not included)

FLIP UP SIGHTS

FUF // $41.95
FUR // $41.95

The Flip-Up Front (FUF) sight works with the Flip-Up Rear (FUR) and the pair can also be used in conjunction with our Red/Green Dot optic.

SLING LOOP

SLP // $17.95

The Sling Loop quickly attaches to any Picatinny rail. It can be mounted on the bottom or side rail on any of the Mech Tech multi-rail systems.

BARREL BAND SWIVEL MOUNT

BBS // $12.95

Allows you to mount a sling swivel to any CCU.

PRESSED ON FLASH HIDER

FH // $24.95

This flash hider is CNC machined from solid steel bar and finished in black oxide.This unit can be easily installed by the customer if you already have the CCU.

THREADED FLASH HIDER

FH-T // $19.95

This is the threaded flash hider and can be added to any of our CCUs that have threaded barrels.

THREADED MUZZEL BRAKE AND COMPENSATOR

MB // $54.95

This is the threaded muzzle brake and compensator and can be added to any of our CCUs that have threaded barrels.

THREADED BARREL UPGRADE

TB- // $49.95

This is the cost to change your CCU/PCU order from a non-threaded barrel to threaded. You can purchase a threaded barrel for a unit you already have for $208.00.

Threaded Barrel Specifications:
9mm (1/2 x 28 RH)
10mm/40cal (9/16 x 24 RH)
45 ACP (.578 x 28 RH)
All are right-hand thread pattern.