Mech Tech Accessories and Pricing Guide

This guide provides important information that you will want to read before the purchase of a Mech Tech CCU Accessory


 

MechTech- Parablock - 1911 CCU

PARABLOCK

PBA // $23.95

This is a ‘ParaBlock’ and it is used with 1911 style frames which have been cut to accept ramped barrels. This device allows the Mech Tech CCU to be used with these frames.

 


 

MechTech Glock Feed Ramp

FEED RAMP FOR GLOCK

GBL OR GBC // $16.95

This is a feed ramp and it is used with all Glock frames. This device is necessary for proper feeding with these frames. One feed ramp is included with each CCU for Glock pistols. Once the CCU has been properly assembled, the feed ramp cannot fall out. The feed ramp comes in three sizes: Large (GBL) for use with Standard and Large frames, Compact (GBC) for use with Compact frames and Gen 5 (GB GEN.5) frames. A small magnet retains this part in the frame during assembly/disassembly.

 


 

MechTech XD Feed Ramp

FEED RAMP FOR XD

XDR // $17.95

This is a feed ramp and it is used with all XD frames. This device is necessary for proper feeding with these frames. One feed ramp is included with each CCU for XD pistols. Once the CCU has been properly assembled, the feed ramp cannot fall out. A small magnet retains this part in the frame during assembly/disassembly.

 


 

MechTech - Telestock Closed MechTech - Telestock Extended

TELESTOCK

TEL // $89.95

This is a 5 position telescoping stock shown fully extended and fully collapsed. It has a sling stud for mounting your own loop. Comes with a butt pad standard.

 


 

MechTech - Fixed Stock

M4 FIXED STOCK

M4FS // $34.95

Yes, it looks like an M4 adjustable stock. However, we have replaced the buffer tube with our own adaptor to fix it in place.

 


 

MechTech - Adjustable Stock

M4 ADJUSTABLE STOCK

M4 // $99.95

This is a standard, 6 position, M4 stock (shown fully collapsed) with the buffer tube mounted to the CCU using the adapter shown in the photo immediately below. The M4 Adapter comes with this stock and so is incuded in the price shown.

 


 

MechTech - Stock Adapter

M4 STOCK ADAPTER

M4A // $34.95

This adapter attaches to the rear of the CCU housing. Many customers already own an M4 stock and buffer tube. The adapter accepts both military and commercial buffer tubes.

 


 

MechTech - Butt Pad MechTech - Butt Pad2

BUTT PAD

BP // $13.95

This butt pad comes standard on our Telestock. It is also available for use on our M4 Fixed and M4 Adjustable stocks.

 


 

MechTech - Folding Grip

VERTICAL FORE GRIP – FOLDING

VGF // $25.95

The folding fore grip has locks in multiple positions (backward and forward) and mounts to our Quad Rail for most versatile use.

 


 

MechTech - Optics

RED/GREEN DOT OPTIC

RGS // $57.10

This unique holographic sight gives you a choice of the classic red dot or a new green dot. If you have never used a green dot you don’t know what you’re missing. Each color can be intensity adjusted with the dial on top. The sight also features flip-up protective lens covers. Standard Picatinny mounting with a quick release.

 


 

MechTech - Mono Rail

MONORAIL

MRL // $79.95

This is a tactical accessory mounting rail. It is 16.5″ end to end. No modifications to the CCU are required. It replaces the Standard Rail.

 


 

MechTech - Mini Rail Kit

MINI RAIL KIT

MRK // $129.95

This kit includes the Mono Rail and gives you 3 2-1/2" short rails for mounting other accessories like a flashlight, sling loop, etc. It replaces the Standard Rail.

 


 

MechTech - Quad Rail

QUAD RAIL

QRL // $169.95

This tactical accessory mounting rail has the Mono Rail and 3 6.5″ rails. This is the best mounting option for our Vertical Fore Grip. It replaces the Standard Rail and Molded Fore Grip.

 


 

MechTech - Mini Quad Rail

MINI QUAD 

MQR // $89.95

Mini Quad – attaches to barrel providing 4 2-1/2" short accessory rails – very solid. This does NOT replace the standard rail, it aligns properly with it for an open front sight.

 


 

MechTech - Long Riser

LONG RISER

PSR // $14.95

This riser is 5 3/4″ long with 13 Picatinny slots. Long Riser provides about 1/2″ of lift. You can mount this on the Standard Rail, QuadRail or MonoRail to gain elevated sight height.

 


 

MechTech - 3 Slot Riser

THREE SLOT RISER

TSR // $14.95

The Three Slot Riser is good for mounting your Red/Green Dot Optic so that you can still use your Flip Up Front & Rear Sights and see them through the optic.

 


 

MechTech - Rubber Rail Guards

RAIL GUARDS

RG // $17.95 // PKG. OF 12

Used with the Quad Rail these handy rubber rail guards simply snap in place on the rails and provide both protection for the rails and a more comfortable grip.

 


 

MechTech - m16 iron sight Carry Handle

M16 ‘CARRY HANDLE’ SIGHT SYSTEM

FRONT SIGHT // M16F // $29.95
REAR CARRY HANDLE REAR SIGHT // M16R // $49.95

M16 style sight system. The front and rear sight set mount directly to the Mini Rail Kit, Mini Quad Rail, MonoRail and QuadRail rail systems. The sights are adjustable and operate exactly as M16 sights. (shown mounted on a rail for clarity, rail not included)

 


 

MechTech - Flip Sights

FLIP UP SIGHTS

FUF // $41.95
FUR // $41.95

The Flip-Up Front (FUF) sight works with the Flip-Up Rear (FUR) and the pair can also be used in conjunction with our Red/Green Dot optic.

 


 

MechTech - Sling

SLING LOOP

SLP // $17.95

The Sling Loop quickly attaches to any Picatinny rail. It can be mounted on the bottom or side rail on any of the Mech Tech multi-rail systems.

 


 

MechTech - Swivel Mount

BARREL BAND SWIVEL MOUNT

BBS // $12.95

Allows you to mount a sling swivel to any CCU.

 


 

MechTech - Flash Hider

PRESSED ON FLASH HIDER

FH // $24.95

This flash hider is CNC machined from solid steel bar and finished in black oxide.This unit can be easily installed by the customer if you already have the CCU.

 


 

 

THREADED FLASH HIDER

FH-T // $19.95

This is the threaded flash hider and can be added to any of our CCUs that have threaded barrels.

 


 

MechTech - Threaded Barrel

THREADED BARREL

TB- // $50.00

A threaded barrel can be ordered to replace a standard barrel or during the order process it can be selected as an option.

Threaded Barrel Specifications:
9mm (1/2 x 28 RH)
10mm/40cal (9/16 x 24 RH)
45 ACP (.578 x 28 RH)
All are right-hand thread pattern.

 

Mech Tech - CCU - XDM - 1911 - GLOCK

3247 U.S. 93 S, Kalispell,
MT 59901

CALL: (866) 433-2122

Mech Tech Pistol-to-Carbine Conversion Uppers (CCU) for Glock, 1911-Style & Springfield XD Pistols.

MechTech - Facebook MechTech - Instagram MechTech - Youtube