Accessories

Rails and Flash Hider are factory installed on new CCU orders. All other accessories are shipped in their original packaging.

NOTE: All accessories will fit both the new model CCU (straight front) and the older model CCU (angled front). Prices shown do not include shipping.

Parablock/Feed Ramps for Glock & XD

PARABLOCK

PBA // $23.95

This is a ‘ParaBlock’ and it is used with 1911 style frames which have been cut to accept ramped barrels. This device allows the Mech Tech CCU to be used with these frames.

Feed ramp for Glock

GBL or GBC // $16.95

This is a feed ramp and it is used with all Glock frames. This device is necessary for proper feeding with these frames. One feed ramp is included with each CCU for Glock pistols. Once the CCU has been properly assembled, the feed ramp cannot fall out. The feed ramp comes in two sizes: Large (GBL)for use with Standard and Large frames and Compact (GBC) for use with Compact frames. A small magnet retains this part in the frame during assembly/disassembly.

Feed ramp for XD

XDR // $17.95

This is a feed ramp and it is used with all XD frames. This device is necessary for proper feeding with these frames. One feed ramp is included with each CCU for XD pistols. Once the CCU has been properly assembled, the feed ramp cannot fall out. A small magnet retains this part in the frame during assembly/disassembly.

NOTE ABOUT THE INTERCHANGEABLE STOCKS SHOWN BELOW: Older models of the CCU did not have the interchangeable stock system. These units have a welded on fixed stock. There is available a retrofit housing kit which accepts the stocks shown below. This kit includes an updated housing and a recoil buffer assembly. This can be changed out by the customer or call Mech Tech and arrange to send in the unit for retrofit. We have also changed the fore grip and standard rail. The fore grip is now injection molded, black, with ribs (see Other Rail Choices pictures below). The standard 6″ rail now has Picatinny slots for it’s full length instead of 3 pairs of slots. The new fore grip and standard rail are optional. If you have the welded on stock, all of our accessories are ‘new’. Have a look at the rest of this page and see if there are any enhancements you’d like to get with your new housing.

Part number and cost of the kit:
Retrofit Housing $59.95 // Fore Grip $19.95 // Standard Rail $14.95

TELESTOCK

Telestock

TEL // $89.95

This is a 5 position telescoping stock shown fully extended and fully collapsed. It has a sling stud for mounting your own loop.

FIXED STOCK

M4 Fixed Stock

M4FS // $34.95

Yes, it looks like an M4 adjustable stock. However, we have replaced the buffer tube with our own adaptor to fix it in place.

ADJUSTABLE STOCK

M4 ADJUSTABLE STOCK

M4 // $99.95

This is a standard, 6 position, M4 stock (shown fully collapsed) with the buffer tube mounted to the CCU using the adapter shown in the photo immediately below. The M4 Adapter comes with this stock and so is incuded in the price shown.

M-4 STOCK ADAPTER

M4 Stock Adapter

M4A // $34.95

This adapter attaches to the rear of the CCU housing. Many customers already own an M4 stock and buffer tube. The adapter accepts both military and commercial buffer tubes.

BUTT PAD

Butt Pad

BP // $13.95

This butt pad comes standard on our Telestock. It is also available for use on our M4 Fixed and M4 Adjustable stocks.

Vertical Fore Grip

VERTICAL FORE GRIP – FOLDING

VGF // $25.95

The folding fore grip has locks in multiple positions (backward and forward) and mounts to our Quad Rail for most versatile use.

Flashlights and Optics

TACTICAL XENON FLASHLIGHT

TXL // $39.95

Picatinny mount tactical flashlight. Triple activation featuring twist on, push button and remote pressure switch operations. Fully adjustable from flood to spot focus.

RED/GREEN DOT OPTIC

RGS // $57.10

This unique holographic sight gives you a choice of the classic red dot or a new green dot. If you have never used a green dot you don’t know what you’re missing. Each color can be intensity adjusted with the dial on top. The sight also features flip-up protective lens covers. Standard Picatinny mounting with a quick release.

Other Rail Choices

MONORAIL

MRL // $79.95

This is a tactical accessory mounting rail. It is 16.5″ end to end. No modifications to the CCU are required. It replaces the Standard Rail.

MINI RAIL KIT

MRK // $129.95

This kit includes the Mono Rail and gives you 3 short rails for mounting other accessories like a flashlight, sling loop, etc. It replaces the Standard Rail.

QUAD RAIL

QRL // $169.95

This tactical accessory mounting rail has the Mono Rail and 3 6.5″ rails. This is the best mounting option for our Vertical Fore Grip. It replaces the Standard Rail and Molded Fore Grip.

MINI QUAD 

MQR // $89.95

Mini Quad – attaches to barrel providing 4 short accessory rails – very solid. This does NOT replace the standard rail, it aligns properly with it for an open front sight.

LONG RISER

PSR // $14.95

This riser is 5 3/4″ long with 13 Picatinny slots. Long Riser provides about 1/2″ of lift. You can mount this on the QuadRail or MonoRail to gain elevated sight height.

Three slot riser

TSR // $14.95

The Three Slot Riser is good for mounting your Red/Green Dot Optic so that you can still use your Flip Up Front & Rear Sights and see them through the optic.

RAIL GUARDS

RG // $17.95 // pkg. of 12

Used with the Quad Rail these handy rubber rail guards simply snap in place on the rails and provide both protection for the rails and a more comfortable grip.

Sight Systems

M16 ‘CARRY HANDLE’ SIGHT SYSTEM

Front Sight // M16F // $29.95
Rear Sight // M16R // $49.95

M16 style sight system. The front and rear sight set mount directly to both the MonoRail and QuadRail rail systems. The sights are adjustable and operate exactly as M16 sights. (shown mounted on a rail for clarity, rail not included)

FLIP UP SIGHTS

FUF // $41.95
FUR // 
$41.95

The Flip-Up Front (FUF) sight works with the Flip-Up Rear (FUR) and the pair can also be used in conjunction with our Red/Green Dot optic.

Sling Accessories

SLING LOOP

SLP // $17.95

The Sling Loop quickly attaches to any Picatinny rail. It can be mounted on the bottom or side rail on any of the Mech Tech multi-rail systems.

BARREL BAND SWIVEL MOUNT

BBS // $12.95

Allows you to mount a sling swivel to any CCU.

FLASH HIDER

FLASH HIDER

FH // $29.95

This flash hider is CNC machined from solid steel bar and finished in black oxide.This unit can be easily installed by the customer if you already have the CCU.